Use this checklist as a quick inspection, not a substitute for checking the parts that came with your setup.
Before a session
- Check that each wheel is secure and turns freely.
- Look for wheel contact, loose hardware or unusual side-to-side movement.
- Listen for new grinding and feel for a wheel that sticks.
After dusty or damp conditions
- Wipe away dirt and moisture from the wheels and accessible hardware.
- Store the board in a dry, ventilated place.
- Inspect again before the next ride, especially if a wheel feels rough or makes a new noise.
When cleaning or lubricating
- Clean only when needed and use products compatible with the bearing materials.
- Let bearings dry fully before adding lubricant.
- Follow the cleaner and lubricant labels and any DSCO product instructions.
Replace rather than risk it
If a bearing is cracked, visibly damaged, significantly rusty or remains rough after appropriate care, do not ride it. Check the DSCO maintenance page and our guide to replacing bearings.